Menu

Sizing is where most heating installations succeed or fail. Before we ever recommend a furnace, heat pump, or boiler, we calculate the actual heating load for your home using Manual J procedures that account for square footage, insulation values, window placement, ceiling height, and the realities of Front Range winters. An oversized unit cycles on and off too frequently, wearing out components and leaving rooms unevenly heated. An undersized unit runs constantly and still fails to keep up during a January cold snap. Getting the load calculation right is the single most important decision in the entire project, and it is the foundation of every heating installation we complete.

At M and M Heating, Cooling, Plumbing and Electrical, we have been handling heating installations across Longmont, Dacono, Eric, Firestone, Frederick, Johnstown, Longmont, Mead, CO since 1998. As a family owned and operated company, we treat each installation as a long-term relationship rather than a one-time transaction. Our technicians are NATE-certified, factory trained, and EPA certified, which means the people in your home understand both the engineering behind modern heating equipment and the specific demands of installing it correctly in Colorado’s climate and elevation.

Choosing the Right Heating System for Your Home

The term “heating installation” covers several distinct types of equipment, and the right choice depends on your home’s construction, your existing ductwork, your fuel availability, and your budget for both equipment and operating costs. Natural gas furnaces remain the most common choice throughout Longmont, Dacono, Eric, Firestone, Frederick, Johnstown, Longmont, Mead, CO because of efficient winter performance and the availability of natural gas service in most neighborhoods. We also install heat pumps, which pull heat from outdoor air and move it indoors, offering impressive efficiency during the milder parts of the heating season while doubling as cooling equipment in summer.

Boilers serve homes with radiant floor heating or baseboard radiators, delivering steady, comfortable warmth without the air movement associated with forced-air systems. When a homeowner asks us which system is best, our answer always starts with questions rather than a sales pitch. We want to understand how your current system has performed, which rooms never seem to stay comfortable, how long you plan to stay in the home, and what matters most to you in terms of monthly energy costs. Only after we understand those priorities do we recommend specific equipment and efficiency ratings.

Understanding Efficiency Ratings and Technical Specifications

Furnace efficiency is measured by AFUE, or Annual Fuel Utilization Efficiency, expressed as a percentage. A furnace rated at 80 percent AFUE converts 80 percent of its fuel into usable heat, while a high-efficiency condensing furnace can reach 95 percent or higher. The higher-efficiency models cost more up front and require a condensate drain and different venting, but they reduce fuel consumption over the life of the equipment. For heat pumps, we look at two numbers: HSPF for heating performance and SEER for cooling performance. A higher HSPF indicates a unit that delivers more heat per unit of electricity consumed.

Beyond the headline ratings, several technical factors influence how well your new system performs. Blower motor type matters significantly, and we often recommend variable-speed ECM blowers because they adjust airflow gradually, maintain more even temperatures, and run more quietly than single-speed motors. Two-stage and modulating gas valves allow a furnace to run at reduced output during mild weather, which improves comfort and efficiency. We walk every customer through these specifications in plain language so the decision makes sense rather than feeling like a gamble.

Our Heating Installation Process From Start to Finish

A properly managed installation follows a clear sequence, and we keep you informed at every stage. Here is how a typical project unfolds when you work with us:

  • In-home assessment: We measure your home, inspect existing ductwork or piping, evaluate your electrical and gas connections, and perform the load calculation that determines correct equipment size.
  • Equipment recommendation: We present options at different efficiency levels, explain the trade-offs, and provide a written proposal with no hidden surprises.
  • Removal of old equipment: We disconnect and remove your existing furnace, heat pump, or boiler, handling refrigerant recovery according to EPA regulations and disposing of old components responsibly.
  • Installation and connection: We set the new equipment, connect gas, electrical, and venting, modify ductwork or piping where needed, and ensure proper clearances for safety and serviceability.
  • Startup and verification: We test the system under load, verify airflow and temperature rise, check gas pressure and combustion, and confirm the thermostat communicates correctly with the equipment.

Throughout the process, we protect your floors and work areas, and we clean up thoroughly before we leave. We also take the time to show you how to operate your new thermostat and explain the maintenance schedule that will keep your warranty valid and your system running efficiently. An installation is not complete until you understand how to live with the equipment we just put in your home.

Why Correct Installation Matters More Than the Equipment Itself

You can purchase the most advanced, highest-efficiency furnace on the market and still end up with a disappointing result if the installation is rushed or careless. Ductwork that leaks air into unconditioned spaces wastes a large fraction of the heat your furnace produces. Incorrect gas pressure reduces efficiency and can shorten equipment life. Improper venting creates safety hazards. Thermostat wiring mistakes prevent advanced features from functioning. These are the details that separate a professional installation from a marginal one, and they are exactly where our factory training and NATE certification make a measurable difference.

Colorado’s elevation adds another layer of complexity. At higher altitudes, combustion equipment must be adjusted because the air contains less oxygen than it would at sea level. Gas appliances require derating and proper orifice sizing to burn cleanly and safely in thinner air. Our technicians account for these adjustments as a matter of routine, which is one of the reasons homeowners across Longmont, Dacono, Eric, Firestone, Frederick, Johnstown, Longmont, Mead, CO rely on M and M Heating, Cooling, Plumbing and Electrical for installations that perform correctly from the first cold morning.

Serving Homeowners Throughout the Region

We install heating systems for homes of every age and style across Longmont, Dacono, Eric, Firestone, Frederick, Johnstown, Longmont, Mead, CO, from newer construction with modern ductwork to older houses that need creative solutions to accommodate current equipment. Common situations where we help include:

  1. Aging furnace replacement: When a furnace reaches the end of its service life, replacing it before it fails prevents a no-heat emergency in the middle of winter.
  2. Efficiency upgrades: Homeowners looking to reduce monthly energy costs often move from an older low-efficiency furnace to a modern high-efficiency model or heat pump.
  3. Home additions and remodels: New living space frequently requires additional heating capacity or a redesigned duct layout to keep temperatures consistent.
  4. Fuel or system changes: Some homeowners convert from electric resistance heat to a gas furnace or add a heat pump to gain year-round comfort from a single system.

Whatever brings you to consider a new heating system, our goal is the same: a correctly sized, properly installed, and safely vented system that keeps your home comfortable for years to come. As a family owned and operated business serving the community since 1998, we have built our reputation on doing the work right the first time. When you are ready to discuss a heating installation, reach out to M and M Heating, Cooling, Plumbing and Electrical and we will walk you through your options with the honesty and technical care your home deserves.

Company Logo 1
Company Logo 2
Company Logo 3
Company Logo 4
Company Logo 5
Company Logo 6
Company Logo 7
Company Logo 8
Company Logo 9
Company Logo 10
Company Logo 11
Company Logo 12
Company Logo 13
Word Around Town
I appreciate the honesty and integrity that he presented. Did not try to steer me in a direction that was not needed just to make a buck. I would recommend M and M just off that alone. That’s hard to...
Mike R.
M and M replaced my 40 year old hot water baseboard boiler heater and zone valves. They did a great job. Professional and protected my new carpet. I would highly recommend them.
Brian W.
As usual, the service was timely and Stephen does an exceptional job. Very customer oriented, and explains any issues in detail so you can make educated decisions. Have used M&M for many years and extremely pleased.
Michael G.
Working with Chad was really great. He understood our needs, explained what would need to be done to accomplish our needs. He produced a reasonable quote and we have scheduled the time to get the wok done. Easy as one,...
Ken R.
So far, so good! The tech, Will, who came out to evaluate our AC and Furnace was quick and efficient, and located the issues that two other well-reviewed local HVAC companies didn’t catch. He made clear recommendations on how we...
Ben W.
dark blue mountain icon

Gunbarrel, CO

Berthoud, CO

Superior, CO

Lafayette, CO

Louisville, CO

Niwot, CO